Here are the two challenges I would like to attend:
1) A Blog Named Hero Challenge - Watercoloring with Honey Bee Stamps, below is the challenge photo:
2) Simon Wednesday Challenge - A Bit of Sparkle, below is the challenge photo:
And here is the card I made to attend the above two challenges:
I used Hero Arts Peacock Feather stencil on a piece of white cardstock and spread my custom colors shimmer paste with Distress inks and Nuvo clear glitter paste to create a watercolor ombre effect. Then, I colored the feathers (from Honey Bee Stamps - Ten Things) with ZIG Clean Color Real Brush and the clear Wink of Stella pen. Cut out these two feathers and attached on an oval vellum. White embossed "Thank You" and used foam tapes to attach to the background. I love the shimmering watercolor effect with ZIG watercolor markers and the shimmer paste. Below is another look of the card:
Supplies:
Cardstock: MFT
Stamps: Honey Bee Stamps
Stencil: Hero Arts
Ink Pads: Versafine, Versamark, Distress ink pads
Others: vellum, white embossing powder, Nuvo shimmer paste, foam tapes, ZIG Clean Color Real Brush
Thank you for visiting my blog.
Tuesday, May 23, 2017
Tuesday, May 16, 2017
Poppystamps Challenge PSC#32 - Flower Power
Here is Poppystamps Challenge #32 - Flower Power, below is the challenge photo:
And here is the card I made for this challenge:
I applied Dixtress Oxide inks over the background using the blending tool. Then, I spritzed water on the Memory Box Floral Mask stencil and "stamp" on the background. Let the stencil stayed on the background for a while and lift it up. The background had the water resist effect. I die cut the Memory Box Honeyblossom Sprig die from white cardstock and attached on the background. I white embossed Happy Birthday on the lower right hand corner. Finish the card by die cutting the stitched rectangle frame from white cardstock and attached it with foam tapes to make it dimensional. Below is another look of the card:
Supplies:
Cardstock: MFT
Stamps: Simon Says Stamp
Ink Pads: Distress Oxide, Versamark
Die Cut: Memory Box
Stencil: Memory Box
Others: white embossing powder, foam tapes
Thank you for visiting my blog.
And here is the card I made for this challenge:
I applied Dixtress Oxide inks over the background using the blending tool. Then, I spritzed water on the Memory Box Floral Mask stencil and "stamp" on the background. Let the stencil stayed on the background for a while and lift it up. The background had the water resist effect. I die cut the Memory Box Honeyblossom Sprig die from white cardstock and attached on the background. I white embossed Happy Birthday on the lower right hand corner. Finish the card by die cutting the stitched rectangle frame from white cardstock and attached it with foam tapes to make it dimensional. Below is another look of the card:
Supplies:
Cardstock: MFT
Stamps: Simon Says Stamp
Ink Pads: Distress Oxide, Versamark
Die Cut: Memory Box
Stencil: Memory Box
Others: white embossing powder, foam tapes
Thank you for visiting my blog.
Thursday, May 11, 2017
Lawn Fawnatics Challenge 4 - Black, White, and Bright!
Here is Lawn Fawnatics challenge 4 - black, white, and bright! Below is the challenge photo:
And here is the card I made for this challenge:
I used black and white cardstock stripes to make the background. I stamped gumball machine and three extra gumballs on another piece of white cardstock and colored them with Copic markers. I also brushed the clear Wink of Stella pen on the gumballs and the metal parts to make it shiny. I attached the gumball machine and balls on the background with foam tapes. Finish the card by white embossing "You're so sweet" on one of the black stripes. Below is another look of the card:
Supplies:
Cardstock: MFT, Stampin' Up, Neenah
Stamps: Lawn Fawn (Sweet Smiles)
Ink Pads: MFT, Versamark
Others: Copic markers, clear Wink of Stella brush pen, foam tapes, white embossing powder
Thank you for visiting my blog.
And here is the card I made for this challenge:
I used black and white cardstock stripes to make the background. I stamped gumball machine and three extra gumballs on another piece of white cardstock and colored them with Copic markers. I also brushed the clear Wink of Stella pen on the gumballs and the metal parts to make it shiny. I attached the gumball machine and balls on the background with foam tapes. Finish the card by white embossing "You're so sweet" on one of the black stripes. Below is another look of the card:
Supplies:
Cardstock: MFT, Stampin' Up, Neenah
Stamps: Lawn Fawn (Sweet Smiles)
Ink Pads: MFT, Versamark
Others: Copic markers, clear Wink of Stella brush pen, foam tapes, white embossing powder
Thank you for visiting my blog.
Monday, May 8, 2017
The Ton May Challenge - Tic Tac Toe
Here is The Ton May Challenge - Tic Tac Toe, below is the challenge photo:
I picked the "glitter", "embossing", and "stripes" to make this card attending the challenge.
I stamped six macarons in a row with the "Macarons" stamp set. I used the Quickie Glue pen to put on each filling of the macarons and sprinkled the glitters on. For the background stripes, I used the post-it stripes and applied Distress Oxide inks to make the rainbow stripes. Finish the card by heat embossing the greeting - Life is short. Eat macarons. I love this card because the colors and macarons make me feel happy. Below is another look of the card:
Supplies:
Cardstock: MFT
Stamps: The Ton
Ink Pads: Memento, Stampin' Up, Simon Says Stamp, Distress Oxide, Versafine
Others: glitters, post-it tapes, clear embossing powder, MISTI
Thank you for visiting my blog.
I picked the "glitter", "embossing", and "stripes" to make this card attending the challenge.
I stamped six macarons in a row with the "Macarons" stamp set. I used the Quickie Glue pen to put on each filling of the macarons and sprinkled the glitters on. For the background stripes, I used the post-it stripes and applied Distress Oxide inks to make the rainbow stripes. Finish the card by heat embossing the greeting - Life is short. Eat macarons. I love this card because the colors and macarons make me feel happy. Below is another look of the card:
Supplies:
Cardstock: MFT
Stamps: The Ton
Ink Pads: Memento, Stampin' Up, Simon Says Stamp, Distress Oxide, Versafine
Others: glitters, post-it tapes, clear embossing powder, MISTI
Thank you for visiting my blog.
Thursday, May 4, 2017
Happy Mother's Day
Mother's Day is coming. I made a Mother's Day card for my Mom and attend the following two challenges:
1) Rubbernecker Challenge #8 - Mother's Day
2) Word Art Wednesday Challenge #280-281 - Anything Goes, below is the word art:
And here is the card I made to attend the above two challenges:
I colored the Wildflowers in the Wind stamp set from Rubbernecker with Marvy Le Plume II markers, and stamped on the Bristol paper. Then, I used the damp waterbrush to blend the colors. Once it dried, I brushed the clear Wink of the Stella pen on the flowers. I also shaded around the images with light blue ZIG Clean Color Real brush. The Happy Mother's Day was stamped with Smoky Gray Versafine ink pad and embossed with clear embossing powder. Finish the card by dropping some Tonic Studios Nuvo Jewel Drops (color: sea breeze) on the background. I also die cut the background with a stitched border die and used foam tapes to mount on top of a white card. Below is another look of the card:
Supplies:
Cardstock: Bristol paper, MFT
Stamps: Rubbernecker, Hero Arts
Ink Pads: Versafine
Others: Marvy Le Plume II markers, clear Wink of the Stella, ZIG Clean Color Real Brush, clear embossing powder, border die, foam tapes
Thank you for visiting my blog.
1) Rubbernecker Challenge #8 - Mother's Day
2) Word Art Wednesday Challenge #280-281 - Anything Goes, below is the word art:
And here is the card I made to attend the above two challenges:
I colored the Wildflowers in the Wind stamp set from Rubbernecker with Marvy Le Plume II markers, and stamped on the Bristol paper. Then, I used the damp waterbrush to blend the colors. Once it dried, I brushed the clear Wink of the Stella pen on the flowers. I also shaded around the images with light blue ZIG Clean Color Real brush. The Happy Mother's Day was stamped with Smoky Gray Versafine ink pad and embossed with clear embossing powder. Finish the card by dropping some Tonic Studios Nuvo Jewel Drops (color: sea breeze) on the background. I also die cut the background with a stitched border die and used foam tapes to mount on top of a white card. Below is another look of the card:
Supplies:
Cardstock: Bristol paper, MFT
Stamps: Rubbernecker, Hero Arts
Ink Pads: Versafine
Others: Marvy Le Plume II markers, clear Wink of the Stella, ZIG Clean Color Real Brush, clear embossing powder, border die, foam tapes
Thank you for visiting my blog.
Subscribe to:
Posts (Atom)